12.07.2015 Views

SAFA Ramp Inspections - Code7700

SAFA Ramp Inspections - Code7700

SAFA Ramp Inspections - Code7700

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

<strong>SAFA</strong> <strong>Ramp</strong> Inspection ProceduresGuidance materialInspectionItemStd. Cat. Std. ref. Standard’s Text Pre-described Finding PDF code Instructions forcompleting the detaileddescriptionb) until the package, overpack or freightcontainercontaining the dangerous goods has beeninspected in accordance with the acceptanceprocedures contained in the TechnicalD02 I 2 DOC 9284(Part 7)D02 I 3 DOC 9284(Part 7)Instructions.• 2.7.1 Each unit load device containingdangerous goods which require a class hazardlabel must clearly display on its exterior anindication that dangerous goods are containedwithin the unit load device, unless those hazardclass labels are themselves visible.• 2.7.2 This indication must be provided byattaching to the unit load device an identificationtag having a border of prominent red hatchingson both sides and the minimum dimensions of148mmx 210 mm. The primary and subsidiaryhazard class(es) or division(s) numbers of suchdangerous goods must be clearly marked on thistag.• 2.7.3 If the unit load device contains packagesbearing “Cargo aircraft only” label, either thatlabel must be visible or the tag must indicate thatthe unit load device can only be loaded on acargo aircraft.• 2.7.4 The tag must be removed from the unitload device immediately after the dangerousgoods have been unloaded.• 2.7.1 Each unit load device containingdangerous goods which require a class hazardlabel must clearly display on its exterior anindication that dangerous goods are containedwithin the unit load device, unless those hazardclass labels are themselves visible.• 2.7.2 This indication must be provided byattaching to the unit load device an identificationtag having a border of prominent red hatchingson both sides and the minimum dimensions of148mmx 210 mm. The primary and subsidiaryRequired identification tag notproperly filled in or partly invisible(no CAO packages inside)Required identification tag missing(CAO packages inside)D02-07 Indicate the particulars ofthe situation observedD02-08 Indicate the particulars ofthe situation observed<strong>SAFA</strong> Coordination Section Page 195 of 217© European Aviation Safety Agency, 2012 V 2.0

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!