Orion AquaMate 7000 Vis Orion AquaMate 8000 UV-Vis - Daigger

20 Concentration Measurements—Standard Curve ApplicationRecalling a Standard CurveRecalling a Standard Curve To recall a standard curve1. Press Stored Tests.2. Highlight the test to recall and press Enter.Setting the Parameters for a Standard CurveTo set the parameters for a standard curve1. Place the standards in their cell positions.2. Set parameters for measuring the standards.See “Parameters” on page 125 for a complete list.a. Enter the Test Name, Wavelength, Reference Wavelength Correction andReference Wavelength.b. Select the Curve Fit, Units and Sample Positioner.c. Set Number of Standards and Number of Samples.d. Enter the low and high limits.e. Select the settings for Statistics and AutoPrint.f. Run Cell Correction.Measuring the Standards for a Standard Curve To measure standards automatically (using Auto 6 or Auto 3)1. Install the blank and standards.2. When the parameters are correct, press Run Standards.92 Orion AquaMate 7000 Vis and Orion AquaMate 8000 UV-Vis Thermo Scientific