Orion AquaMate 7000 Vis Orion AquaMate 8000 UV-Vis - Daigger

10 Water Analysis ApplicationUsing a Reverse Color Method3. Place a reagent blank (typically a solution prepared using the test kit and a sample knownto have a zero concentration of the analyte, such as distilled water) in the measurementposition and press the Measure Rgnt Blank function key. The Measure Sample optionappears.4. Place your sample in the measurement position and press the Measure Sample functionkey. The data for your sample measurement are displayed. Continue to press the MeasureSample function key after placing each sample in the measurement position in the samplecompartment.Note If you leave the method by pressing the Esc key or the Test key on theinstrument keypad you will need to re-measure the clear and reagent blanks in orderto measure more samples using the reverse color test.Thermo Scientific Orion AquaMate 7000 Vis and Orion AquaMate 8000 UV-Vis 47