Orion AquaMate 7000 Vis Orion AquaMate 8000 UV-Vis - Daigger

16 MultiwavelengthTaking Measurements2. Highlight a position for entering the first wavelength and factor pair.3. Press Add nm.Deleting Wavelengths and Factors4. Enter the values for the wavelength and factor and press Enter.5. When the values are correct, press Add nm.6. Continue until you have entered all the wavelengths and factors.To delete wavelengths and factors1. Press Set nms.Note If no wavelength values have been entered, the wavelength and factor columnswill be empty.2. Highlight the first wavelength and factor pair to delete.3. Press Delete nm.Taking MeasurementsYou can access Multiwavelength acquisition from either the Set nms screen shown above orfrom the Multiwavelength setup screen. To take measurements automatically (Auto 6 or Auto 3)1. Press Run Test to display the Multiwavelength measurement screen.Thermo Scientific Orion AquaMate 7000 Vis and Orion AquaMate 8000 UV-Vis 77