Orion AquaMate 7000 Vis Orion AquaMate 8000 UV-Vis - Daigger

24 ParametersParameterLoad TestLock/UnlockLow/High LimitsMathMeasure Blank(as function key)Measure Blank(as test parameter)Measurement ModeMeasure SamplesMax, XMax, YMin, XMin, YNext CursorNumber of MatchedCuvettesNumber of SamplesDescriptionLoads the highlighted test from the Stored Tests Directory intoactive memory and sets the instrument to the test parameters(Utility)Used to protect stored tests from accidental deletion oralteration; asks for a password to allow the user to lock orunlock the file(Utility)Enters the lowest and highest acceptable results, outside ofwhich the result is flagged as “Low” or “High”(Adv. A-%T-C, Std Curve, Abs Ratio, Abs Diff, Kinetics, 3-PtNet and some Bio Tests)Accesses manipulation functions of the graph(Scanning)Initiates measurement of the blankSelects the frequency of zeroing the instrumentOnce or Every Reading(Kinetics)Selects the type of photometric data reported for ameasurement (Abs, %T, Conc)(in A-%T-C, Kinetics, Scanning, Multiwavelength)Initiates measurement of samplesEnters a maximum X-value to manually rescale the graph(Kinetics, Scanning)Enters a maximum Y-value to manually rescale the graph(Kinetics, Scanning)Enters a minimum X-value to manually rescale the graph(Kinetics, Scanning)Enters a minimum Y-value to manually rescale the graph(Kinetics, Scanning)Selects a cursor point in functions using more than one cursorsetting: Scan-Area and Scan-3-Pt Net calculations in the graph(Scanning)Enters the number of cuvettes that will be run in theCorrection Program (maximum of 5)Enters the number of samples to be measured in the test(Not available in Kinetics or Scanning)Thermo Scientific Orion AquaMate 7000 Vis and Orion AquaMate 8000 UV-Vis 131