Orion AquaMate 7000 Vis Orion AquaMate 8000 UV-Vis - Daigger

10 Water Analysis ApplicationUsing the One Point Adjustment Calibration Feature9. Open the sample chamber door and remove the vial from the sample chamber.10. For reverse color methods only:a. Wipe the exterior of the reagent blank vial and place the reagent blank vial into theholder in the sample chamber. Close the sample chamber door.b. Press the Measure Rgnt Blank function key.c. Open the sample chamber door and remove the vial from the sample chamber.11. Wipe the exterior of the standard vial and place the standard vial into the holder in thesample chamber.12. Close the sample chamber door.13. Press the Measure Standard function key.14. Open the sample chamber door and remove the vial from the sample chamber.The display will show the standard concentration that was entered in step 5, the measuredconcentration without a correction and the calculated adjustment correction factor.Typically a correction factor of 0.7 to 1.3 (within 30%) is acceptable.15. Press the Accept function key if the calculated adjustment correction factor is acceptable.The screen returns to the Water Analysis test menu and displays the adjustment factoramong the parameters.44 Orion AquaMate 7000 Vis and Orion AquaMate 8000 UV-Vis Thermo Scientific