Orion AquaMate 7000 Vis Orion AquaMate 8000 UV-Vis - Daigger

11 Abs and %T Measurements—Basic A-%T-CSetting the WavelengthSetting the Wavelength To set the wavelength1. Press Set nm or any number key to set the wavelength.2. Enter the wavelength for taking measurements and press Set nm again.Measuring a BlankTo measure a blank1. Place the blank in the cell holder.If a 6-Position Cell Changer is installed, place the blank in the B position.2. To enter an absorbance or transmittance value for the blank, press a number key and enterthe desired value in the Entry field.3. Press Measure Blank.Measuring SamplesIf a 6-Position Cell Changer is installed, place the samples in the cell positions and press thecorresponding cell position button to move the cell holder to the measuring position. Theabsorbance (ABS) or percent transmittance (%T) measurement appears on the display.If a Single Cell Holder is installed, remove the blank and place the sample in the cell holder.The absorbance or %Transmittance measurement appears on the display.52 Orion AquaMate 7000 Vis and Orion AquaMate 8000 UV-Vis Thermo Scientific