Orion AquaMate 7000 Vis Orion AquaMate 8000 UV-Vis - Daigger

4Sample Positioner SettingThe spectrophotometer lets you use many different cell holders and accessories to takemeasurements. When you select your test parameters, you select the type of measurementrequired and indicate the number of samples. You can choose from the followingmeasurement options:Auto 6Measure one blank and up to five samples without changing cuvettes in the cell changer. Theinstrument automatically measures the blank and advances the cell changer to measure theremaining samples.Auto 3Measure one blank and two samples without changing cuvettes in the cell changer. Theinstrument automatically measures the blank and advances the cell changer to measure thesamples in positions 2 and 4.Manual 3This setting is used only for the Water Analysis test. Use the buttons on the keypad to positionthe desired sample holder in the beam for measurement.Single Cell HolderPlace the blank in the cell holder, measure it, place a sample in the cell holder, and thenmeasure your sample. This process is completely manual. The cell position buttons do notfunction when you select Single Cell Holder.Note You can cause the 6-Cell Changer to function as a single cell holder and measureonly one cell by selecting this option. However, we recommend that the single cell holderbe used for accessories requiring a high degree of positioning repeatability, such as thenanoCell accessory, small aperture microcells, the coupling module of fiber optics probes,and flowcells used with a sipper system.Thermo Scientific Orion AquaMate 7000 Vis and Orion AquaMate 8000 UV-Vis 19