Orion AquaMate 7000 Vis Orion AquaMate 8000 UV-Vis - Daigger

24 ParametersParameterNumber of StandardsPrinterProtein FactorRef. WavelengthRef. WavelengthCorrectionRun Corr.Run StandardRun TestSample PositionerSample VolumeSave TestScan speedScreen ContrastDescriptionEnters the number of standards to be measured for thestandard curveSelects the output mode (RS-232, Parallel)(Utility)Enters the factor to calculate Protein concentration(DNA Bio Tests)Enters a reference wavelength value; for each reportedmeasurement, measures the analytical wavelength andreference wavelength. Reported measurement =Abs@Analytical WL - Abs@Reference WLTurns reference wavelength correction on or offInitiates the collection of cuvette data for cell correctionGoes to the Standards entry screenGoes to the data collection screen(all tests)Selects the type of Positioner1 Cell = no movement (zeros and measures sample in sameposition(Not available in Kinetics and Scanning)Manual 6 = cell changer moved by buttons (always zeros onposition B, then returns to set position to start measurement(Not available in Kinetics and Scanning)Auto 3 = turret auto moved - B, 2, 4 (always zeros on positionB, then goes to position 2 to start measurement)(Not available in Kinetics and Scanning)Auto 6 = turret auto moved - B,1,2,3,4,5 (always zeros onposition B, then goes to position 1 to start measurement)Enters the total volume of sample(under Dilution Multiplier in some Bio Tests)Saves all parameters of the current test in internal memory forlater recall(all tests)Selects the speed (nm/min) for a scan – Slow, Medium, Fast(Scanning tests only)Lets you improve visibility of the display by changing thecontrast between the background and text(Utility)132 Orion AquaMate 7000 Vis and Orion AquaMate 8000 UV-Vis Thermo Scientific