Orion AquaMate 7000 Vis Orion AquaMate 8000 UV-Vis - Daigger

24 ParametersParameterSelect TestSet Max. XSet Min. XSet nmsSet OptionsSetup correctionSlopeSmoothingSoftware RevisionSRE toleranceStandard ConcentrationsStandbyStart wavelengthStatisticsStd ConcentrationStop wavelengthStored Tests DirectoryDescriptionTags the highlighted test name with “>” to include the test inthe SmartStart menu(Utility Stored Tests Directory)Sets the cursor position in the graph as the minimum X andthe maximum X values for recalculating rate(Kinetics)Lets you enter and edit the wavelength and factor valuesSelects the factor entry or the baseline to calculate area underthe peak in the graph(Scanning)Initiates the procedure to collect the data necessary to correctfor absorbance differences between cuvettes(all test types)Enters ?Abs/?Concentration value(Standard Curve test type)Turns data smoothing on and off(Scanning)Displays the version of firmware in the instrument(Utility)Acceptable minimum stray lightEnters the concentration of standards used to generate thestandard curve for the testSelects the time since the last keystroke or instrument activity;powers down the unit to save lamp life(Utility)Enters the beginning wavelength for a scan(Scanning tests only)Turns stats on or off; if ON, calculates the average and Std Devof results; Statistics registers are cleared when Statistics = OFFand/or when instrument is OFF, and/or when test parametersare changed, and/or when test is saved (or resaved)(in all test types except Kinetics, Scanning, Multiwavelength)Enters the concentration of the analyte in the standardsolutionEnters the ending wavelength for a scan(Scanning tests only)Displays the list of tests stored in the instrument(Utility)Thermo Scientific Orion AquaMate 7000 Vis and Orion AquaMate 8000 UV-Vis 133