Leica GPS1200+ System Field Manual

17.5 Logging of Raw ObsDescriptionLogged raw observations are used for• static and kinematic operations. With these operations, raw data is always postprocessedin the office. Raw data must therefore be logged on both referenceand rover receivers.• real-time operationsto check the work in the office by post-processing.ORto fill in gaps when a real-time position could not be calculated in the field.This can happen due to problems with the real-time data reception.Observations must be logged on all receivers which will be used for post-processing.AccessCONFIGURELogging of RawObsSelect Main Menu: Config...\Survey Settings...\Logging of Raw Obs.CONT (F1)To accept changes and return to thescreen from where this screen wasaccessed.FILES (F6)Available unless or . Toconfigure the files for raw observations.Description of fieldsField Option DescriptionNever, StaticOnly or Static &MovingIf Radio DownAvailable unless .Determines if raw observation are logged andduring what circumstances they are logged.Available for . Continuousraw observation logging during static andmoving intervals when no real-time correctionsare being received by a receiver.Yes or No Available for .Determines if the reference logs raw observations. User input Available for .Raw data logging begins after the specified timeif radio contact is lost.User inputAvailable for .Raw data logging continues for the specifiedtime, also after the radio link is regained.110 GPS1200+ Config...\Survey Settings...