Leica GPS1200+ System Field Manual

20 Config...\Interfaces... - General20.1 OverviewDescriptionInterface, port anddeviceThe receiver has a variety of interfaces which can be configured to be used withdifferent ports and devices. The configuration varies depending on the individualapplication.Description of the technical termsTechnical term Description ExampleInterface An interface should be considered as a function of Real-Timethe receiver.PortDeviceThe physical port on the instrument which will beused for the interface functionality. It is sometimesnecessary to use particular ports with certain interfaces.The hardware which is connected to the chosenport.Port P1RadioAccessCONFIGUREInterfacesSelect Main Menu: Config...\Interfaces....The screen gives an overview of all interfaces with the currently assigned port anddevice. If a second real-time interface is configured it will also be shown.CONT (F1)To return to the screen from wherethis screen was accessed.EDIT (F3)To configure the parameters relatedto the highlighted interface. Refer tothe sections on each individual interfacebelow.CTRL (F4)Available for certain devicesconnected to certain interfaces. Toconfigure additional parameters, forexample changing channels ofradios.SHIFT CONEC (F4) and SHIFT DISCO(F4)Available for a real-time interfaceconfigured to use a device of typedigital cellular phone or modem. Todial the number of another stationconfigured in the active configurationset and to hang up again.Config...\Interfaces... - General GPS1200+ 133