Leica GPS1200+ System Field Manual

Field Option Description• For an individual point ID independent of theID template SHIFT INDIV (F5). SHIFT RUN(F5) changes back to the next ID from theconfigured ID template.The linework flag to be stored with the point.- - - - - No linework flag is stored.Begin Line Opens a new line when the next point is stored.Any line/area which is currently open is closedand the last point belonging to that line/area isgiven the End Line/Close Area linework flag.The point may or may not be stored with a pointcode.3pt Curve Stores the linework flag for a curve throughthree points and continues a line/area.ReOpen AnyLineReOpen LastLineEnd LineCont Line/AreaStart SplineEnd SplineCont SplineBegin AreaOpens a line from a list of all lines which arecurrently stored in the job when the next point isstored. The last code used with the reopenedline is automatically selected when the point isstored. Any line/area which is currently open isclosed and the last point belonging to thatline/area is given the End Line/Close Area lineworkflag.Opens the last used line again. The last codeused with the reopened line is automaticallyselected when the point is stored.Closes all open lines.Indicates a line/area is open.Stores the linework flag for beginning a splineand continues any open line/area.Closes a spline and continues any openline/area.Indicates a line/area is open with spline linetype.Opens a new area when the next point is stored.Any line/area which is currently open is closedand the last point belonging to that line/area isgiven the End Line/Close Area linework flag.The point may or may not be stored with a pointcode.70 GPS1200+ Linework