Leica GPS1200+ System Field Manual

1.3 Operating PrinciplesKeyboard andtouch screenThe user interface is operated either by the keyboard or by the touch screen withsupplied stylus.The workflow is the same for keyboard and touch screen. The difference is the wayinformation is selected and entered.Operation by keyboardInformation is selected and entered using the keys. Refer to "1.1 Keyboard" for adetailed description of the keys on the keyboard and their function.Operation by touch screenInformation is selected and entered on the screen using the supplied stylus.OperationDescriptionTo select an item Tap on the item.To start the edit mode in Tap on the input field.input fieldsTo highlight an item orparts of it for editingTo accept data enteredinto an input field and exitthe edit modeDrag the supplied stylus from the left to the right.Tap on the screen outside of the input field.Turn receiver on Hold PROG for 2 s.Turn receiver offThe receiver can only be turned off in GPS1200+ Main Menu.Press both USER and PROG simultaneously.ORHold ESC for 2 s.Lock/Unlockkeyboard (onlyRX1210/RX1210T)Option DescriptionLock To lock the keyboard press and hold SHIFT for 3 s. The message’Keyboard locked’ is momentariliy displayed on the Message Line.Unlock To unlock the keyboard press and hold SHIFT for 3 s. The message’Keyboard unlocked’ is momentariliy displayed on the Message Line.Selecting from amenu.AppearanceDescriptionTo select an item from a menu, do one of the following:Move the focus to the item. ENTER or CONT (F1).ORType the complete selection number in front of theitem. ENTER or CONT (F1) are not required.12 GPS1200+ User Interface