Leica GPS1200+ System Field Manual

IF the PIN codeentered isTHENwrong the fifth time the PUK code is required. GPS1200+ Enter Security PINCode Error: 478 is displayed.OK (F4) to access GPS1200+ Enter Security PUK Code.Refer to paragraph "GPS1200+ Enter Security PUK Code".GPS1200+Enter Security PUKCodeRefer to paragraph "GPS1200+ Enter Security PIN Code" for information onsoftkeys.Description of fieldsField Option DescriptionPUK Code User input The PUK code as generated by Leica Geosystems.• For receivers delivered with firmwareversion 2.10 or higher, the PUK code comeswith the receiver.• For receivers delivered with firmwareversions lower than v2.10, contact a Leicarepresentative to obtain a PUK code.Serial No. Output The serial number of the receiver. This isneeded to obtain the PUK code from LeicaGeosystems.Next stepIF the PUK code enterediscorrectwrongTHENthe old PIN code is cleared and the PIN protection isdeactivated. GPS1200+ Main Menu is displayed.GPS1200+ keeps asking for the correct PUK code.SHIFT QUIT (F6) to turn off the receiver.40 GPS1200+ Receiver Protection with PIN