Leica GPS1200+ System Field Manual

Field Option DescriptionCRNot available for RS232 device. The terminatoris a carriage return. 6, 7 or 8 Number of bits in a block of digital data. 1 or 2 Number of bits at the end of a block of digitaldata.None orRTS/CTSActivates hardware handshake.Next stepIF the device is aradio or device other than digitalcellular phone or modemdigital cellular phone or modemTHENSTORE (F1) to close the screen and to return tothe screen from where CONFIGURE XX Devicewas accessed.ATCMD (F4). Refer to paragraph "CONFIGUREGSM/Modem AT Command Lines".CONFIGUREGSM/Modem ATCommand LinesFor in CONFIGURE XX Device, this screen consists of twopages. The following table lists the fields of both pages.Description of fieldsField Option Description User input Initilisation sequence to initilise digital cellularphone/modem. User input Allows the or the string tocontinue onto a new line. User input Initilisation sequence to initilise digital cellularphone/modem. User input Dialing string used to dial the phone number. User input Hangup sequence used to end the networkconnection. User input Escape sequence used to switch to thecommand mode before using the hangupsequence. User input Dialing string used to dial into the Internet.When the device is used, between and , a check for the PIN isperformed.Next stepStep Description1. STORE (F1) returns to CONFIGURE XX Device.Configuration of Devices GPS1200+ 163