Leica GPS1200+ System Field Manual

10.2 Combining Linework and CodingDescriptionCombining Linework and coding can only be configured if thematical point codes orif thematical point, line and area codes are available for selection. Thematical codingcan be done with or without codelists.Linework and coding can also be combined using SmartCodes. For information onconfiguring and using SmartCodes refer to GPS1200+ Technical Reference Manual.Requirements • A display mask must be configured with• a field for codes.• a choicelist for Linework.• The configuration of a field for code types in a display mask is required forworking with point, line and area codes without choicelist. Else the configurationof a field for code types is optional.• Configure in CONFIGURE Coding & Linework, Coding page• or .• or .• In CONFIGURE Coding & Linework Settings, Linework page define the flagsfor Linework.Access step-bystep• or in CONFIGURE Real-TimeMode.The Survey application program is used here to explain the combination of Lineworkand coding.Step Description1. Select Main Menu: Survey to access SURVEY Survey Begin.2. In SURVEY Survey Begin select a job.3. Select a configuration set with or .4. Select an antenna.5. CONT (F1) to access SURVEY Survey: Job Name.72 GPS1200+ Linework