Leica GPS1200+ System Field Manual

20.2.6 Configuration of GGA Message Sending for ReferenceNetwork ApplicationsDescriptionAccess step-bystepMost reference networks require an approximate position of the rover. For referencenetwork applications, a rover dials into the reference network and submits its approximateposition in form of a NMEA GGA message.Step Description1. Select Main Menu: Config...\Interfaces....2. Highlight Real-Time.3. EDIT (F3)4. CONFIGURE Real-Time Mode5. ROVER (F2) to access CONFIGURE Additional Rover Options.6. GGA (F5) to access CONFIGURE Send GGA NMEA.CONFIGURESend GGA NMEACONT (F1)To accept changes and return to thescreen from where this screen wasaccessed.COORD (F2)Available for and . To view othercoordinate types.LAST (F3)Available for . To use thesame coordinates in the GGAmessage as when the receiver waslast used in a reference networkapplication.HERE (F4)Available for . To use thecoordinates of the current navigationposition in the GGA message.SHIFT ELL H (F2) and SHIFT ORTH (F2)Available for local coordinates. Tochange between the ellipsoidal andthe orthometric height.Config...\Interfaces... - General GPS1200+ 149