Leica GPS1200+ System Field Manual

Field Option Description 6 or 8Defines the number of bits/byte in the RTCMmessage being received.Next stepPAGE (F6) changes to the NTRIP page.CONFIGUREAdditional RoverOptions,NTRIP pageDescription of fieldsField Option Description User input A user ID is required to receive data from theNTRIP Caster. Contact the NTRIP administratorfor information. User input Allows the string to continue onto anew line. User input A password is required to receive data from theNTRIP Caster. Contact the NTRIP administratorfor information. User input The NTRIP Source from where real-time data isrequired. SRCE (F5) to download the NTRIPSource table if is unknown.CONFIGUREAdditional RoverOptions,RTCM OptionspageNext stepPAGE (F6) changes to the RTCM Options page.This page is only available for in CONFIGURE Real-Time Mode.Description of fieldsField Option DescriptionYes or NoNoShowTo set a RTCM coordinate system received by areference network as active coordinate system.Is marked grey and set to No for in CONFIGUREAdditional Rover Options, Generalpage.Defines whether to show and/or log an infomessage (RTCM message 1029), which isreceived from a reference network.The info message will not be shown by thereceiver.The info message will only be shown by thereceiver.146 GPS1200+ Config...\Interfaces... - General