Leica GPS1200+ System Field Manual

Way of workingstep-by-stepStep Description1. Type in the IP address. IP address format IPv6, for example2001:0db8:85a3:08d3:1319:8a2e:0370:7334, is NOT supported.For RX1250 receivers only: Type in the host name.2. Type in a port. Any number between 0 and 65535 is valid.3. Type in the user ID. If no value is typed in, then the instrument logs intothe FTP server anonymously.4. Type in the password.5. CONEC (F1)6. TOOLS Field to Office, Field pageOnce the connection to the FTP server is established, this screen isdisplayed.The files and folders on the CompactFlash Card of the instrument aredisplayed including their size. To get into the folders, highlight the folderand ENTER.Highlight an object and press UPLD (F1), to zip all the files belonging tothe object and uploading them to the FTP server.UNZIP (F2) unzips a zipped file in the download directory.IMPRT (F3) To move a file from the \Download folder to the appropriatedirectory folder based on it's file extension type.Available in the \Download folder when a file is highlighted. Unavailable forunrecognised files in the \Download folder. These must stay in the \Downloadfolder.SHIFT QUIT (F6) returns to GPS1200+ Main Menu and disconnects automaticallyfrom the FTP server.7. PAGE (F6) changes to the Office page.8. TOOLS Field to Office, Office pageThe files located on the FTP server are displayed.Whenever switching to this page, a refresh action is done or it reconnectsto the server if the connection to the server was disconnected.DWNLD (F1) downloads the highlighted file or folder list on the FTP serverconnected to the local download folder.Downloaded files are moved automatically to the corresponding directoriesif recongnised by the system. If not, they are stored in the downloadfolder. Zipped file are unzipped before storing in the download folder.SHIFT RFRSH (F5) refreshes the FTP directory.Tools... GPS1200+ 183