Leica GPS1200+ System Field Manual

17.6 Point Occupation SettingsDescriptionAccessCONFIGUREPoint OccupationSettingsThe settings on this screen define the way in which points are occupied andrecorded.Select Main Menu: Config...\Survey Settings...\Point Occupation Settings.CONT (F1)To accept changes and return to thescreen from where this screen wasaccessed.PARAM (F3)To configure the time interval afterwhich a point occupation can bestopped automatically. Refer to paragraph"CONFIGURE Post-ProcessStop Criteria".Description of fieldsField Option DescriptionNormalInstantaneousNoYesTimedYes or NoRecords observations between pressingOCUPY (F1) and STOP (F1).Records the time tag when OCUPY (F1) ispressed. A coordinate is interpolated betweenthe positions at the neighbouring two epochs tofilter out effects of slight movement.Available for .Starts point occupation when pressing OCUPY(F1).Starts point occupation automatically whenentering SURVEY Survey: Job Name. Allsubsequent points must be occupied bypressing OCUPY (F1).Starts point occupation automatically at acertain time. The start time is specified inSURVEY Survey: Job Name.Available for .Stops the measurements automatically whenthe parameter defined for reaches 100 %.112 GPS1200+ Config...\Survey Settings...