Leica GPS1200+ System Field Manual

STATUSLogging,Ring Buffer pageDescription of fieldsFieldDescriptionThe number of the active ring buffer.The number of files stored in the ring buffer.The flag assigned to the stored observations.The configured observation rate by which data is logged.The local time when the first observation available in the ringbuffer is stored.The local time when the last observation available in the ringbuffer is stored.Next stepPAGE (F6) changes to the Reference page, Ref (FKP) or Ref (VRS) page.STATUSLogging,Reference pageAs shown below, the name of the page changes depending on the type of referenceused.Name of pageReference pageRef (Nearest)pageRef (i-MAX) pageRef (MAX) pageRef (VRS) pageRef (FKP) pageDescriptionReference is a real reference station.Reference is the closest to the rover determined by forexample LEICA GNSS Spider.Reference information are individualised Master-Auxiliarycorrections determined and sent by for example LEICA GNSSSpider.Reference information are Master-Auxiliary corrections determinedand sent by for example LEICA GNSS Spider.Reference is a virtual reference station.Reference information are area correction parameters.Description of fieldsField Option DescriptionA time in secNot knownNoneThe logging rate at the reference. This informationis shown if the real-time message formatsupports this information and raw observationsare being logged at the reference.The real-time message format does not supportthis information or the information is not yetreceived by the rover.Raw observations are not being logged at thereference.STATUS GPS1200+ 197