Leica GPS1200+ System Field Manual

Field Option Description Bluetooth x Available for RX1250. The Bluetooth port whichwill be used for the interface functionality.Clip-onNETxPort xPort 1Available for RX1250. The clip-on-contacts. It isused for RX1250 with GHT56 when a device isattached to the GHT56.Available for an activated Internet interface. Ifthese ports are not assigned to a specific interface,then these ports are additional remoteports.The physical port P1, P2 or P3 on the instrumentto which the device is attached.Available for RX1250. LEMO port on RX1250.Next stepREF (F2) changes to CONFIGURE Additional Reference Options, General page.CONFIGUREAdditional ReferenceOptions,General pageDescription of fieldsField Option Description User input An identification for a reference station. It isconverted into a compact format and sent outwith real-time data in all real-time data formats.It is different from the point ID of the referencestation.An ID of the reference station is required ifworking with several reference stations in timeslicing mode on the same frequency. In thiscase, the ID of the reference station from whichdata is to be accepted must typed in at the rover.Yes or NoThe possibility to send real-time messagesdelayed. This is required when real-timemessages from different reference stations aresent on the same radio channel. Time slicingworks for all device types.2, 3 or 4 Available for .The number of reference stations in use fromwhere real-time messages are sent. 2, 3 or 4The contents ofthe choicelistdepends on thesettings for.Available for .The time slot represents the actual time delay.The number of possible time slots is the numberof reference stations in use. The time delayequals 1 s divided by the total number of referencestations.Config...\Interfaces... - General GPS1200+ 139