Leica GPS1200+ System Field Manual

5 Receiver Protection with PINDescriptionThe receiver can be protected by a Personal Identification Number. If the PIN protectionis activated, the receiver prompts for PIN code entry after starting up and beforeGPS1200+ Main Menu comes up.If a wrong PIN has been typed in five times, a Personal UnblocKing code is required.This chapter explains the workflow of entering PIN and PUK.AccessGPS1200+ Enter Security PIN Code is automatically accessed during starting upthe receiver when in CONFIGURE Start Up & Power Down, PINCode page and a PIN has been defined before.GPS1200+ Enter Security PUK Code is automatically accessed during starting upthe receiver when a wrong PIN code has been typed in five times.GPS1200+Enter Security PINCodeOK (F4)To accept the PIN code and tocontinue with the subsequent screen.SHIFT QUIT (F6)To turn off the receiver.Description of fieldsField Option DescriptionPIN Code User input The PIN code as previously defined inCONFIGURE Start Up & Power Down, PINCode page. The correct PIN code must be typedin within five attempts or the PUK code isrequired.Next stepIF the PIN codeentered iscorrectwrongTHENGPS1200+ Main Menu is displayed.GPS1200+ Enter Security PIN Code Error: 479 isdisplayed.OK (F4) to return to GPS1200+ Enter Security PIN Codewhere a PIN code can be typed in again.Receiver Protection with PIN GPS1200+ 39