Leica GPS1200+ System Field Manual

8.4 Point Sorting and Filters8.4.1 Sorting and Filters for Points, Lines and AreasDescriptionThe sort settings define the order of the objects in the active job.The filter settings define the objects to be viewed.An active filter for an object is indicated in MANAGE Data: Job Name by on theright hand side of the page name.The sort and filter settings are stored in the job. They are remembered after turningoff the instrument and are copied to a new job.When a job becomes active, then the sort and filter settings of this job are saved inthe SystemRAM. If the CompactFlash card is formatted then these last used sort andfilter settings are used for the job Default.Access step-bystepMANAGESorts & Filters,Points pageStep Description1. Refer to "6 Manage... - Getting Started" to access MANAGE Data: JobName.2. In MANAGE Data: Job Name on the Points, Lines (X) or Areas (X)page, SHIFT FILT (F5) to access MANAGE Sorts & Filters.3. MANAGE Sorts & FiltersThe page for an object is displayed when the equivalent page is displayedin MANAGE Data: Job Name.The functionality on the Lines (X) and Areas (X) page is similar to that on the Pointspage. For simplicity, only the Points page is described.The available fields on this screen depend on the selected setting for .CONT (F1)To close the screen and to return tothe screen from where this screenwas accessed.STAKE (F5)To filter points for the Stakeout applicationprogram.Manage...\Data GPS1200+ 61