Leica GPS1200+ System Field Manual

21.2 Accessing CONFIGURE Devices / GPRS Internet DevicesDescription Allows devices to be created, edited, selected and deleted. Refer to "22Config...\Interfaces... - Controlling Devices" for more information about configuringdevices.Access step-bystepStep Description1. Main Menu: Config...\Interfaces...2. Highlight the appropriate interface based on the type of device that needsto be configured. For example, highlight Real-Time when a radio is to beconfigured.3. EDIT (F3) to access CONFIGURE XX.4. DEVCE (F5) to access CONFIGURE Devices / CONFIGURE GPRSInternet Devices.CONFIGUREDevices;CONFIGUREGPRS InternetDevicesThis screen may consist of several pages and provides different devices for selectiondepending on which interface the screen was accessed from. The functionalitydescribed below is always the same.CONT (F1)To select the highlighted device andreturn to the screen from where thisscreen was accessed.NEW (F2)To create a new device.EDIT (F3)To edit the highlighted device.DEL (F4)To delete the highlighted device.MORE (F5)To display information about the typeof device and the creator of thedevice.SHIFT DEFLT (F5)To recall previously deleted defaultdevices and to reset default devicesto the default settings.Description of columnsColumnNameTypeCreatorDescriptionNames of available devices.Type of device defined when creating the device.The creator of the device. The creator can either be Default if thedevice is a default, or User if the device has been created.If a Default device is edited by using EDIT (F3) then itscreator is still displayed as Default.160 GPS1200+ Configuration of Devices