Leica GPS1200+ System Field Manual

22.3 RadiosDescriptionAccessCONFIGURERadio ChannelFor radios the channels on which the radio broadcasts can be changed. Changingchannels changes the frequency at which the radio operates.Refer to "22.1 Accessing Config...\Interfaces... - Controlling Devices" to accessCONFIGURE Radio Channel.Channel changing may contravene radio broadcasting regulations in certain countries.Before operating with radios, check the regulations in force in the working area.If channel changing is to be used, when configuring the reference real-time interface,set in CONFIGURE Additional Reference Options, General pageto a different ID for each reference site. By doing so, the rover can recognise if theincoming real-time data after channel changing is being received from a differentreference station or if the original reference station is using a new frequency. In thefirst case, the ambiguities are recomputed.CONT (F1)To accept the changes and tocontinue with the subsequentscreen.SCAN (F5)To find out information such as thestation ID, latency and the dataformat of incoming signals fromreference stations.Description of fieldsField Option DescriptionOutputThe type of radio highlighted whenCONFIGURE Radio Channel was accessed. User input The radio channel. The minimum and maximumallowed input values for a radio depend on thenumber of channels supported by the radio andthe spacing between the channels.OutputAvailable for .Displays the actual frequency of the radio.Config...\Interfaces... - ControllingDevicesGPS1200+ 169