Leica GPS1200+ System Field Manual

21.3 Creating a New Device / Editing a DeviceAccess step-bystepStep Description1. Refer to "21.2 Accessing CONFIGURE Devices / GPRS Internet Devices"to access CONFIGURE Devices / CONFIGURE GPRS InternetDevices.2. In CONFIGURE Devices / CONFIGURE GPRS Internet Devices highlighta device of the same type as the device to be created, from the list.3. NEW (F2)/EDIT (F3) to access CONFIGURE New Device/CONFIGUREEdit Device.Editing a device is similar to creating a new device. For simplicity, the screens arecalled CONFIGURE XX Device and differences are clearly outlined.CONFIGUREXX DeviceSTORE (F1)To store the new device and to returnto the screen from where this screenwas accessed.ATCMD (F4)Available for digital cellular phonesand modems. To configure communicationcommands.Description of fieldsField Option Description User input Available when creating a new device. Name ofnew device.OutputAvailable when editing a device. The name ofthe device. Output The type of device.Yes or NoFrom 2400 to115200None, Even orOddCR/LFAvailable for digital cellular phones andmodems. Defines the device as an Internetcapable device and adds it to the list inCONFIGURE GPRS Internet Devices.Frequency of data transfer from receiver todevice in bits per second.Error checksum at the end of a block of digitaldata.Available when editing a device and if requiredby the interface.The terminator is a carriage return followed by aline feed.162 GPS1200+ Configuration of Devices