Leica GPS1200+ System Field Manual

24.1.5 Occupation Information StatusDescriptionAccessThis screen shows information related to the amount of time required at a point andthe amount of time spent on a point.Step Description1. Press USER to access GPS1200+ User Menu.2. Press STAT (F3) to access STATUS Status Menu.3. Select Survey...\Occupation Information Status.STATUSOccupation Information(Static);STATUSOccupation Information(Moving)Available for logging of raw observations. The name of the screen changes with thestatic or moving mode of the receiver. The values are reset with each new staticinterval. Information on this screen is available for and .For static modeDescription of fieldsFieldDescriptionThe percentage of collected data required for successfulprocessing.It is a conservative estimate based on a 10 - 15 km baseline.The criteria used to display this value depend on the settings for, and in MainMenu: Config...\Point Occupation Settings.The estimated time in hours, minutes and seconds until the configuredcriteria for or is reached.The criteria used to display this value depend on the settings for, and in MainMenu: Config...\Point Occupation Settings.The time passed since OCUPY was pressed in the SURVEYscreen.The number of cycle slips on L1 and L2 that have occurred sincerecording started on the current point.Rate at which raw observations are being recorded.The number of logged static raw observations. Reset as soon as anew static interval starts.STATUS GPS1200+ 199