Leica GPS1200+ System Field Manual

8.2 Point Management8.2.1 Creating a New Point/Editing a PointAccess step-bystepMANAGEXX Point,Coords pageStep Description1. Refer to "6 Manage... - Getting Started" to access MANAGE Data: JobName, Points page.2. MANAGE Data: Job Name, Points pageIf a point is to be edited, then highlight the point.3. NEW (F2)/EDIT (F3) to access MANAGE New Point/MANAGE EditPoint: Point ID.Editing points is similar to creating a new point. For simplicity, the screens are calledMANAGE XX Point and differences are clearly outlined. If editing a point, then thevisible pages and softkeys on this screen depend on the properties of the point beingedited.STORE (F1)To store the point and all associatedinformation and to return toMANAGE Data: Job Name, Pointspage.COORD (F2)To view other coordinate types.NORTH (F3) or SOUTH (F3)Available for local geodetic orWGS 1984 geodetic coordinateswhen or is highlighted. To changebetween North and South latitude.EAST (F3) or WEST (F3)Available for local geodetic orWGS 1984 geodetic coordinateswhen or is highlighted. To changebetween East and West longitude.MORE (F5)Available for editing a point. Todisplay information about class, subclass, 3D coordinate quality, time anddate of when point was stored, instrumentsource and the flag for Lineworkif available.SHIFT ELL H (F2) or SHIFT ORTH (F2)Available for local coordinates. Tochange between the ellipsoidal andthe orthometric height.50 GPS1200+ Manage...\Data