Leica GPS1200+ System Field Manual

More documents

Recommendations

Info

2.2 Post-Processed Static Reference on PillarUseEquipment setupThe equipment setup described below is to be used for static operations on fixedsurveying pillars.abcdefghijGPS12_012a) GNSS antennaAX1201/AX1203+ GNSS/AR25/AT504 GGf) Receiver GX1210+/GX1220+/GX1220+ GNSS/GX1230+/GX1230+ GNSSb) Carrier g) Two batteriesc) Tribrach h) 2.8 m antenna cabled) Pillar plate if required i) CompactFlash carde) RX1210, if required j) Transport container24 <strong>GPS1200+</strong> Equipment Setup
2.3 Real-Time Reference, Single TripodUseThe equipment setup described below is to be used for real-time reference stationswith normal radio coverage. Raw observation data may also be collected for postprocessing.Equipment setupabcldefghijkmnoGPS12_016a) Radio antenna i) RX1210, if requiredb) Radio antenna arm 15 cm longj) Receiver GX1210+/GX1220+/GX1220+ GNSS/GX1230+/GX1230+ GNSSc) GNSS antennaAX1201/AX1203+ GNSS k) Radio in housingd) Height hook l) Transport containere) Carrier m) 1.2 m antenna cable to connectradio housing to radio antennaf) Tribrach n) Two batteriesg) 1.2 m antenna cable to connect o) CompactFlash cardreceiver and GNSS antennah) TripodEquipment Setup <strong>GPS1200+</strong> 25
Page 1 and 2: Version 7.0EnglishLeica GPS1200+Sys
Page 3 and 4: Name Description FormatSystem Field
Page 5 and 6: 10 Linework 6910.1 Performing Linew
Page 7 and 8: 26 Menu Tree 213Index 215Table of C
Page 9 and 10: 1 User Interface1.1 KeyboardKeyboar
Page 11 and 12: 1.2 ScreenScreenabcdeGPS12 129kfghi
Page 13 and 14: AppearanceDescriptionORTap on the i
Page 15 and 16: 1.4 IconsDescriptionIcons show the
Page 17 and 18: Real-time mode: RoverAn arrow point
Page 19 and 20: IconDescriptionThe internal memory
Page 21 and 22: 1.5 SymbolsDescriptionFilterThe sym
Page 23: 2 Equipment Setup2.1 Receiver Ports
Page 27 and 28: 2.5 SmartRover - External RadioUseE
Page 29 and 30: Position of cablesin the minipackca
Page 31 and 32: 9.3 mm3 Determining Antenna Heights
Page 33 and 34: 4 Using RX12504.1 Switching between
Page 35 and 36: 4.3 Interface Configuration4.3.1 Ov
Page 37 and 38: 4.3.3 Configuring Clip-On Interface
Page 39 and 40: 5 Receiver Protection with PINDescr
Page 41 and 42: 6 Manage... - Getting StartedAccess
Page 43 and 44: SHIFT DEFLT (F5)Available for MANAG
Page 45 and 46: 7 Manage...\Jobs7.1 OverviewDescrip
Page 47 and 48: Next stepPAGE (F6) changes to the C
Page 49 and 50: 8 Manage...\Data8.1 OverviewDescrip
Page 51 and 52: SHIFT INDIV (F5) or SHIFT RUN (F5)T
Page 53 and 54: Next stepIFcreating a pointTHENSTOR
Page 55 and 56: EDIT (F3)To view and edit the highl
Page 57 and 58: 8.3 Line/Area Management8.3.1 Overv
Page 59 and 60: Field Option Description Choicelist
Page 61 and 62: 8.4 Point Sorting and Filters8.4.1
Page 63 and 64: 8.4.2 Point, Line and Area Code Fil
Page 65 and 66: 9 Manage...\Codelists9.1 Creating a
Page 67 and 68: NEW-A (F2)To add a new input field
Page 69 and 70: 10 Linework10.1 Performing Linework
Page 71 and 72: Field Option DescriptionReOpen AnyA
Page 73 and 74: SURVEYSurvey: Job Name,Survey pageT
Page 75 and 76:
11 Manage...\Coordinate Systems11.1
Page 77 and 78:
Field Option Description Choicelist
Page 79 and 80:
11.3.2 Creating/Editing a Transform
Page 81 and 82:
11.4 Geoid/CSCS ModelsThe creation
Page 83 and 84:
12 Manage...\Configuration Sets12.1
Page 85 and 86:
12.3 Editing a Configuration SetAcc
Page 87 and 88:
13 Manage...\Antennas13.1 OverviewD
Page 89 and 90:
MANAGENew Antenna,IGS pageThe combi
Page 91 and 92:
14 Convert...\Export Data from Job1
Page 93 and 94:
Field Option DescriptionData, GSI o
Page 95 and 96:
14.4 Exporting LandXML DataGeneralA
Page 97 and 98:
15 Convert...\Import Data to Job15.
Page 99 and 100:
Page 101 and 102:
16 Convert...\Copy Points Between J
Page 103 and 104:
17 Config...\Survey Settings...17.1
Page 105 and 106:
17.2 Display SettingsDescriptionDis
Page 107 and 108:
17.3 Coding & LineworkDescriptionAc
Page 109 and 110:
17.4 Quality Control SettingsDescri
Page 111 and 112:
Field Option DescriptionFrom 0.05s
Page 113 and 114:
Field Option DescriptionChoicelistC
Page 115 and 116:
CONFIGUREReal-Time StopCriteriaDesc
Page 117 and 118:
18 Config...\Instrument Settings...
Page 119 and 120:
Field Option Description Automatic
Page 121 and 122:
18.4 Instrument IDDescriptionAccess
Page 123 and 124:
19 Config...\General Settings...19.
Page 125 and 126:
19.3 Units & FormatsDescriptionAcce
Page 127 and 128:
Field Option DescriptionLat,Long or
Page 129 and 130:
19.5 Display, Beeps, TextDescriptio
Page 131 and 132:
19.6 Start Up & Power DownDescripti
Page 133 and 134:
20 Config...\Interfaces... - Genera
Page 135 and 136:
20.2 Real-Time20.2.1 OverviewDescri
Page 137 and 138:
20.2.3 Configuration of a Reference
Page 139 and 140:
Field Option Description Bluetooth
Page 141 and 142:
Page 143 and 144:
Description of fieldsField Option D
Page 145 and 146:
Page 147 and 148:
Field Option DescriptionLogShow and
Page 149 and 150:
20.2.6 Configuration of GGA Message
Page 151 and 152:
20.3 Hidden PointDescriptionAccessC
Page 153 and 154:
Next stepStep Description1. CONT (F
Page 155 and 156:
Field Option DescriptionBluetooth x
Page 157 and 158:
Field Option Description User input
Page 159 and 160:
21 Configuration of Devices21.1 Ove
Page 161 and 162:
Next stepCONT (F1) closes the scree
Page 163 and 164:
Field Option DescriptionCRNot avail
Page 165 and 166:
22 Config...\Interfaces... - Contro
Page 167 and 168:
Page 169 and 170:
22.3 RadiosDescriptionAccessCONFIGU
Page 171 and 172:
22.5 GPRS / Internet DevicesDescrip
Page 173 and 174:
Field Option Description User input
Page 175 and 176:
Next stepStep Description1. STORE (
Page 177 and 178:
23 Tools...23.1 Format Memory Devic
Page 179 and 180:
23.3 Upload System Files...Descript
Page 181 and 182:
23.5 Licence KeysDescriptionAccessW
Page 183 and 184:
Way of workingstep-by-stepStep Desc
Page 185 and 186:
24 STATUS24.1 STATUS: Survey...24.1
Page 187 and 188:
Description of symbolsSymbolDescrip
Page 189 and 190:
FieldDescriptionAvailable for Galil
Page 191 and 192:
Name of pageRef (Nearest)pageRef (i
Page 193 and 194:
Field,,,,,DescriptionThe pseudorang
Page 195 and 196:
STATUSPosition,Speed pageDescriptio
Page 197 and 198:
STATUSLogging,Ring Buffer pageDescr
Page 199 and 200:
24.1.5 Occupation Information Statu
Page 201 and 202:
24.2 STATUS: Battery & MemoryAccess
Page 203 and 204:
24.3 STATUS: System InformationAcce
Page 205 and 206:
25 NTRIP via Internet25.1 OverviewD
Page 207 and 208:
StepTheDescriptionreceiver is now o
Page 209 and 210:
Step DescriptionHighlight Real-Time
Page 211 and 212:
StepDescription Indicates if charge
Page 213 and 214:
26 Menu TreeMenu treeMAIN MENU||—
Page 215 and 216:
IndexAAbsolute coordinate differenc
Page 217 and 218:
Ellipsoid .........................
Page 219 and 220:
Mechanical reference plane ........
Page 221 and 222:
On, off ...........................
show all

Leica GPS1200+ System Field Manual

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?