Leica GPS1200+ System Field Manual

24.3 STATUS: System InformationAccessStep Description1. Press USER to access GPS1200+ User Menu.2. Press STAT (F3) to access STATUS Status Menu.3. Select System Information.STATUSSystem Information,InstrumentpageShows the type of receiver, the serial number, the equipment number, the ID of thereceiver, the currently active system language, the serial number of the measurementengine and the availability of additional instrument hardware options such asevent input, if the protected OWI commands and the ability to track GPS L5,GLONASS, Galileo and Compass have been activated by a licence key.Next stepPAGE (F6) changes to the Firmware page.STATUSSystem Information,FirmwarepageShows the versions of all system firmware.Description of fieldsFieldDescriptionFirmware version of the onboard software.Expiry date of the contract is shown. Build version of the onboard software. Build version of the processor board. The firmware version for the measurement engine. The firmware version of the boot software for the measurementengine.Firmware version of the boot software. The firmware version for the communication. The navigation firmware version with the algorithms for thesignal processing.Firmware version for the application program interface. Firmware version for the electric front interface.Next stepPAGE (F6) changes to the Application page.STATUSSystem Information,ApplicationpageShows the versions of all uploaded application programs.Next stepCONT (F1) exits STATUS System Information.STATUS GPS1200+ 203