Leica GPS1200+ System Field Manual

Description of fieldsField Option DescriptionUser DefinedFirst ReceivedAny Received User inputandNoneNearesti-MAXMAXVRSFKPYes or NoUser input1.x, 2.1, 2.2 or2.3Incoming real-time data is accepted from thereference station defined in .Incoming real-time data from the first recognisedreference station is accepted.Incoming real-time data from any referencestation is accepted.Available for .The special ID of the reference station fromwhich real-time data is to be received.Defines the type of reference network to beused.To survey without reference station network.The rover sends its position via NMEA GGAmessage to LEICA GNSS Spider. From thisposition, LEICA GNSS Spider determines thereference in a reference network that is closestto the rover.The rover sends its position via NMEA GGAmessage to LEICA GNSS Spider where theMaster-Auxiliary corrections are calculated. Thecorrections are also individualsied by LEICAGNSS Spider, which means it determines thebest suitable corrections for that rover.The rover typically does not send its position toLEICA GNSS Spider. LEICA GNSS Spidercalculates and sends Master-Auxiliary correctionsto the rover. The rover individualises thecorrections for its position, which means it determinesthe best suitable corrections.If this option is selected, a NMEA GGA messagemust be activated using GGA (F4).Area correction parameters.Activates the sending of a Leica proprietaryNMEA message defining the user.Available for .The specific user ID’s to be sent as part of theLeica proprietary NMEA message. By defaultthe serial number of the instrument is displayed.Available for inCONFIGURE Real-Time Mode.The same version must be used at the referenceand the rover.Config...\Interfaces... - General GPS1200+ 145