Fluid Control Systems Selected product range

105Flow direction above seatTechnical dataMediaOther technical dataAttention!Flow direction above seat (only for gases and steam)Gaseous media and steamPlease see information for flow direction below seatValves with flow direction above seat are onlyconditionally usable for liquid media. There is adanger of waterhammer!Ordering chart for valves with flow direction above seatActuator material PA (polyamide), with threaded port and pilot pressure depending on operating pressure according to Charts 1 and 2➔Attention!Valves with flow above the seat are onlyconditionally usable for liquid media.There is a danger of waterhammer!Control functionOrifice [mm]Port connectionthreaded port2000Actuator sizeØ [mm]Cv valuewater[GPM]Operatingpressure up to+180 °C(356 °F)[psi]Item no.Bronze bodyBrass controlmedia insertsItem no.St. st. bodySt. st. controlmedia insertsA 2/2-way, NC by 13 NPT 3/8 40 4.3 232 459 049 459 052spring action NPT 1/2 40 4.3 232 456 041 456 042NPT 1/2 50 4.9 232 454 626 454 63520 NPT 3/4 40 9.2 232 456 043 456 04420 NPT 3/4 50 9.3 232 454 627 454 63625 NPT 1 63 22 232 454 628 454 63732 NPT 1 1/4 63 31 232 454 629 454 63840 NPT 1 1/2 63 40 232 454 630 454 63950 NPT 2 63 57 232 454 632 454 64165 NPT 2 1/2 80 89 203 454 634 454 643A 2/2-way, NC 13 NPT 3/8 40 4.3 232 on request on requestPPS actuator 13 NPT 1/2 40 4.3 232 462 612 on request20 NPT 3/4 40 4.9 232 462 614 on requestProcess ValvesOther pressure ranges, control functions, flow from above, PPS actuators and accessories on requestPressure charts 1 and 2with control function A and flow direction above the seatChart 1Chart 2Operating pressure [bar]Actuator sizeOrifice161412108642DN25/ Ø63DN13/ Ø40Ø63DN32/Ø40DN20/Ø63DN40/Ø63DN50/Operating pressure [bar]Actuator sizeOrifice161412108642Ø50Ø80DN13/DN32/Ø50DN20/Ø80DN40/Ø50DN25/Ø80DN50/Ø80DN6500 1 2 3 4 5 6 7 8 9 10Pilot pressure [bar]00 1 2 3 4 5 6 7 8 9 10Pilot pressure [bar]Ordering chart for accessories3/2-way pilot valves Type 6012 P/6014 P with banjo bolt, port NPT 1/4“Pilot valve acc. to actuator sizeType 6012 P for actuator Ø 40 mm 024 V/DC 427 923Control media inserts G 1/8 120 V/60 Hz 428 551Type 6012 P for actuator Ø 50 and 63 mm 024 V/DC 428 565Control media inserts G 1/4 120 V/60 Hz 428 567Type 6014 P for actuator Ø 80 to 125 mm 024 V/DC 429 134Control media inserts G 1/4 120 V/60 Hz 429 136Ordering chart for accessoriesCable plug Type 2506 Form C or type 2508 Form A(Other versions, please see datasheets for Types 2506/2508)Plug configuration acc. to DIN EN 175301-803(previously DIN 43650)VoltageItem no.Item no.Form C, 0 to 250 V w/o circuit (f. Type 6012 P) 008 353Form A, 0 to 250 V w/o circuit (f. Type 6014 P) 008 376Options and accessories (on request)• Control function I (double-acting actuator) and B(spring-return normally-open)• PPS actuator• TopControl On/Off Type 8631• Electrical position feedback, Type 1060 and 1062• Magnetic-inductive proximity sensors, Type 1071• Stroke limitation max. and min./max.• Manual actuator• Namur adapter for pilot valves• Mounting key for actuator coverNote:For design reasons, some of the accessories cannotbe supplied for actuator size Ø 40 mm. Pleaserequest the Accessories datasheet 2XXX.ApprovalsGL Approvals on request.DVGW Approvals on request.Subject to modifications