Fluid Control Systems Selected product range

366Digital Timer Unitwith 4 switch functions1078-1• Can be plugged into a magnetic coilplug configuration DIN EN 175301-803Form A• Functions can be directly set• 4 different switching functions• Function displayType 1078-1 can be combined with...Type 5281/6213Solenoid valveType 0330/0331Solenoid valveType 0255/0256Solenoid valveType 6518/6519Solenoid valveType 6519 NamurNAMUR valveControllersThe Type 1078-1 works on the basis of a microprocessor,and is used for the control of the cycletimes of solenoid valves. Up to four different switchingtime cycles can be set up.The controller is plugged onto the tag connector ofthe solenoid valve using the integrated instrumentsocket according to DIN EN 175301-803(previously DIN 43650) Form A.The setting of the program and the cycle times iscarried out using DIP switches and potentiometers.The availability of mains voltage and the switchstatus is shown on 2 LEDs.Technical dataOperationWith removable protective coverSetting Functions 1 to 4via an 8-pole DIP switch,with fine tuning using a potentiometerTime ranget on and t off can be continuously set within the selectedtime range using the potentiometerLED displayMains voltageSwitch statusInstallationAs requiredMountingWith cheesehead screwsBody materialPolyamideStandard time range 0.5 to 10 s1.5 to 30 s5.0 to 100 s0.5 to 10 min1.5 to 30 min5.0 to 100 min12.0 to 240 min0.5 to 10 hExpanded time range 0.1 to 2 s0.5 to 10 s5.0 to 100 s0.5 to 10 min3.0 to 60 min0.3 to 6 h1.2 to 24 h5.0 to 100 hSetting at deliveryt on = 0.5 to 10 st off = 0.5 to 10 sFunction: clock generatorFor electrical data, see Type 1078-2For dimensions, see Type 1078-2 without operating unit, with protective coverSubject to modifications