Fluid Control Systems Selected product range

340Sensors S020Dimensions [mm] oftransmitter mounted on S020 Insertion fittingOrificeDNHType 8205 &Type 8206 &Type 8225* &Type 8226*T-Fitting Saddle Plastic spigot St. steel spigot15 185.5 – – –15* 187.020 183.0 – – –20* 187.025 183.0 – – –25* 187.032 187.0 – – –40 190.5 – – –50 196.5 221.0 – 192.065 196.5 220.0 196.0 196.580 – 224.0 203.5 202.5100 – 229.0 213.5 213.0110 – 225.0 – –125 – 232.0 – 224.0150 – 242.0 238.5 235.0180 – 266.0 – -200 – 278.0 271.0 255.5* CONDUCTIVITY version, true union fitting. To use obligatory with 8225 and 8226.Insertion fitting dimensionsInternal thread connection G, Rc, NPT in stainless steel (316L - 1.4404) or brass (CuZn39Pb2)Orifice DN[mm]P[mm]A[mm]D[inch]15 80.3 84.0 G 1/2NPT 1/2Rc 1/220 77.8 94.0 G 3/4NPT 3/4Rc 3/425 78.0 104.0 G 1NPT 1Rc 132 81.6 119.0 G 1 1/4NPT 1 1/4Rc 1 1/440 85.4 129.0 G 1 1/2NPT 1 1/2Rc 1 1/250 91.5 148.5 G 2NPT 2Rc 2HL[mm]16.017.015.017.018.316.323.518.018.023.521.021.023.520.019.027.524.024.0Insertion fitting - InstallationFor pH and ORP measurements:We recommended a „U“-form bypass installation toensure that the electrode is maintained in a wet conditionand enable the customer to calibrate the unit withoutstopping the whole process.PALDSubject to modifications