Fluid Control Systems Selected product range

262INLINE flow switchwith On/Off indicator• For clear, neutral or aggressive fluids• DN 6 to 65 mm orifice• Local indicatorSensors 8032Type 8032 can be combined with...Type S030INLINE fittingType 6013Small solenoid valveThe complete Type 8032 INLINE flow switch is designedfor use in clear, neutral or aggressive liquids.The switch consists of a fitting with integrated paddlewheel(Type S030) and an electronic module (TypeSE32). The electronic module and the fitting can beeasily connected together by a Quarter-Turn.Either one transistor or one relay will be used as thecontact element. The switching points can be set upusing three operating buttons on the display.The Type 8032 is suitable for switching sequencesof valves for On/Off control of liquids in various applications.• Adjustable switching contact (transistoror relay)• Adjustable hysteresis and delay timeType 1067ContinuousSideControlTechnical dataMeasurement rangeFlow velocityAccuracy 1)Teach-InStandard K-factorRepeatabilityType 2702 (8630)Control valve withTopControlfrom 0.5 l/min up to 1200 l/min0.3 to 10 m/s (1.0 ft/s to 32.8 ft/s)≤ ±1% o.F.S.* (at 10 m/s)≤ ±(1% o.F.S.* + 3% o.R.*)≤ 0.4% o.R.*Electrical connection Cable plug acc. to DIN EN 175301-803multipole connector M12, 5-pin / 8-pinVoltage supply cable Length: max. 100 m, shielded; cross section: max. 0.5 mm 2Protection classRelative humidityFluid temperatureAmbient temperatureStorage temperatureMax. fluid pressureViscosity of fluidsFitting materialOther materialsElectronic housingFront panel folioIP 65 with cable plug mounted and tightened≤ 80%, non condensated0 to +50 °C (32 to 122 °F) (PVC fitting)0 to +80 °C (32 to 176 °F) (PP fitting)0 to +100 °C (32 to 212 °F) (PVDF, brass, stainless steel)0 to +60 °C (32 to 140 °F)0 to +60 °C (32 to 140 °F)PN10 (with plastic fitting) - PN16 (with metal fitting - PN40 on request)(see pressure-temperature chart, page 272)300 cSt. max.PVC, PP, PVDF, stainless steel 1.4404/316L, brassPCPolyesterOrifice DN 6 to DN 65 (see fitting Type S030, pages 270 to 275)Operating voltageCurrent consumptionOutputsTransistor (programmable)Relay (programmable)Process valueInput external setpoint* o.F.S. = of Full Scale (10m/s)o.R. = of Reading12 to 30 V DC - filtered and regulatedreverse polarity protected< 80 mA, without load, short circuit proofTransistor, PNP and NPN, Open collector, 5-30 V DCmax. 700 mA, 0 to 300 Hz.3 A/250 V AC or 3 A/30 V DC3 A/48 V AC or 3 A/30 V DC 2)4-20 mA, galvanic insulation;Loop resistance: 1000 Ω at 30 V DC,800 Ω at 24 V DC, 500 Ω at 18 V DC4-20 mA, galvanic insulation; Max. input impedance: 250 Ω1) under reference conditions, i.e. fluid = water, temperatures = 20°C,up and downstream distances respected, adapted dimensions and pipes2)Valid for process value outputSubject to modifications