Fluid Control Systems Selected product range

290Electromagnetic flow transmitter8045Type 8045 can be combined with...• Sensor in solid-state technology(no moving parts)• Shows both flow rate and volume• Simulation: all output signals providedwithout the need for real flow• Clean In Place (CIP)• FDA approvedType S020Insertion fittingType 2712Continuouscontrol valveType 8644-PAirlinevalve islandType 2030Diaphragm valvePLCSensorsThe Magflowmeter 8045 is designed for pipes withdiameters ranging from DN 6 to DN 400 and liquidshaving a conductivity > 20 µS/cm.The transmitter has a large display, a keyboard andprovides 4-20 mA, relay and pulse outputs.The version having a stainless steel sensor is designedfor applications with high pressures (PN16)and high temperatures (up to 110 °C).Technical dataPipe diameter DN 6 to DN 400 (see fitting S020, pages 294 to 301)Measurement range from 0.02 m 3 /h up to 4500 m 3 /hFlow velocityAccuracy 1)TEACH-INStandard K-factorLinearityRepeatability 1)0.2 to 10 m/s(for measured value from 1 to 10m/s and -20 °C < T° < 130°C)≤ ±2 % o.R.*≤ ±4 % o.R.*±(1% o.R.*+ 0.1% o. F.S.*)≤ 0.25% o.R.*Electrical connection Cable glands M 20 x 1.5Voltage supply cable Shielded; cross section: max. 1.5 mm 2Protection classRelative humidityAltitude max. for operatingFluid temperatureAmbient temperatureStorage temperatureMax. fluid pressureConductivityMaterialsHousing, cover / Protection lidFront panel folioWetted partsFittingFinger, electrodesSeal / Electrode holderOperating voltageOutputPulseRelay (programmable)CurrentCurrent consumption* o.F.S. = of Full Scaleo.R. = of ReadingIP 65 with cable gland mounted and tightenedMax. 80%, non condensated2000 m-25 to +110 °C (-13 to 230 °F) (depends on fitting)-10 to +60 °C (14 to 140 °F)-20 to +60 °C (-4 to 140 °F)Max. PN16 (depends on temperature and fitting material,see pressure-temperature chart, page 295)Min. 20 μS/cmPPA, glass fibre reinforced / PSUPolyesterPVC, PP, PVDF, stainless steel 1.4404/316L, brassStainless steel (DIN1.4404)EPDM (FDA agreements) / PEEK (FDA agreements)18-36 V DC (3 wires) - filtered and regulatedprotected against reverse of polarityNPN and PNP, open collector, galvanic insulation, up to36 V DC, 100 mA max., protected against short-circuitsand polarity reversals2 normally open relays, freely adjustable 250 VAC, 3A or30 V DC, 3A (resistive load), max. cutting power of 750 VA(resistive load), Hysteresis thresholds4-20 mA, approx. 500 ms refresh rate;max load: 1300 Ω at 30 V DC, 1000 Ω at 24 V DC,700 Ω at 18 V DCMax. 300 mA1) under reference conditions, i.e. fluid = water, temperatures = 20°C,up and downstream distances respected, adapted dimensions and pipesSubject to modifications