Fluid Control Systems Selected product range

3842/2-way Solenoid Valvefor neutral media,version• General purpose range with servo-diaphragm5281 EEx• Waterhammer-free, low noise• Push-over solenoid system• Seal material NBR, EPDM and FKM• Type of protection Class 1, Div. 1The servo-assisted solenoid valve Type 5281 EEx withservo-diaphragm can be used in accordance with itsprotection type for the shutting off, dosing and filling ofgaseous and liquid media in environments where thereis a danger of explosion.Power consumptionInrushHoldAC AC DC[VA] [VA/W] [W]24 14/8 8Technical dataOrificeDN 13 - 50 mmBody materialThreaded portBrassValve internal material Stainless steel, brassSeal materialNBR (EPDM and FKM on request)Media with NBRNeutral media, compressed air, waterMedia temperature with NBR -10 to +90 °C (14 to 194 °F)Ambient temperature -10 to +40 °C (14 to 104 °F)Type of currentAC/DCVoltage tolerance ±10%Power consumption9 WDuty cycle100% continuous ratingElectrical connection 1/2“ conduit hub with 500mm flying leadsProtection class IP 65Type of protectionapproved forClass 1, Division 1, Group A, B, C and D (explosion proof)Class 2, 3, Division 1, Group E, F and G (dust-ignition proof)Temperature Code T4 (275 °F max. surface temperature)InstallationAs required, preferably with actuator in upright positionApprovalsSubject to modifications