Fluid Control Systems Selected product range

722/2-Way Solenoid Valve forfluids and gases• Switches without differential pressure• For gases and liquidsSolenoid Valves 6213 HPType 6213 HP can be combined with...• Forced coupled diaphragm system• Slip-on coil with high performance• Anti-waterhammer, low noiseType 2508Cable plug(only for AC)Type 1078Timer unit(only for AC)Type 8600Dosing control(only for AC)The Type 6213 HP is a 2/2-way normally closedsolenoid valve with a forced coupled diaphragm system.NoteThe differences between standard version andtype 6213 HP - high performance valve are the higherspring forces combined with high power coils.The valve switches without differential pressurefrom 0 psi with gases and liquids.With 24V/UC HP-coils the cable plug with integratedhigh-power electronics provided with the valve mustbe used.Technical dataOrifice DN 13 - 20Body materialInner part of valveSeal materialMediaNBRMedia temperatureNBRAmbient temperatureVoltagesVoltage tolerance ±10%Duty cycleElectrical connectionProtection classInstallationResponse timesBrass (Stainless steel on request)Stainless steel and PPSNBR (FKM and EPDM on request)neutral fluids, water, hydraulic oil, oil and fatswithout additives-10 to +80°C (14 to 176 °F)max. +55°C (131 °F)24 V UC24/240 V 60 Hz(other voltages on request)100% continuous ratingTag connector acc. to DIN EN 175301-803 Form A(previously DIN 43650) for cable plug type 2508 (seeAccessories)IP 65 with cable plugAs required, preferably with actuator upright150 - 1000 ms (depending on orifice anddifferential pressure)Subject to modifications