Fluid Control Systems Selected product range

264INLINE flow transmitter• Flow measurement for neutral, slightlyaggressive, solid free liquidsSensors 8035 TType 8035 T can be combined with...Type S030INLINE fittingType 2712Globe control valveThe complete Type 8035 INLINE transmitter is speciallydesigned for use in neutral, slightly aggressive,solid-free liquids.The transmitter consists of a compact fitting with anintegrated paddle-wheel (Type SO30) and an electronicmodule (Type SE35).The paddle-wheel is set into motion by the mediumflow, and generates a flow-proportional frequency signalin the transducer (Coil element for the battery version orHall element for others), which is converted into variousoutput signals in the transmitter electronics. The transmitterprovides standard or pulsed output signals thatare proportional to the flow.In addition, the transmitter is fitted with a flow indicator,two totalizers (main and daily count) for measuringquantities and two adjustable switching relays.A battery-driven unit can be used for the effectivedisplay of the totalizers and the flow.The convenient, multi-language operating menucontains special functions such as Teach-in for theK-factor correction, flow simulation for the “dry processtest” and so on.• 6 to 65 mm orifice, compact or remote version• Flow indication including 2 totalizers(flow rate and volume)• Automatic calibration: TEACH-IN• Simulation: all output signals provided withoutthe need for real flowTechnical dataMeasurement rangeFlow velocityAccuracy 1)Teach-InStandard K-factorRepeatabilityElectrical connectionfrom 0.5 l/min up to 1200 l/min0.3 to 10 m/s (Hall version) - 0.5 to 10 m/s (Coil version - battery)≤ ±0.5% o.F.S.* (at 10 m/s)≤ ±(0.5% o.F.S.* + 2.5% o.R.*)≤ 0.4% o.R.*Cable plug acc. to DIN EN 175301-803, cable glandsM 20 x 1.5 or none (for battery version)Voltage supply cable Length: max. 50 m, shielded; cross section: max. 1.5 mm 2Protection classRelative humidityFluid temperatureAmbient temperatureStorage temperatureMax. fluid pressureViscosity of fluidsFitting body materialOther materialsElectronic housingFront panel folioIP 65 with cable plug mounted and tightened≤ 80%, non condensated0 to +50 °C (32 to 122 °F) (PVC fitting)0 to +80 °C (32 to 176 °F) (PP fitting)0 to +100 °C (32 to 212 °F) (PVDF, brass, stainless steel)0 to +60 °C (32 to 140 °F)0 to +60 °C (32 to 140 °F)PN10 (with plastic fitting) - PN16 (with metal fitting - PN40 on request)(see pressure-temperature chart, page 272)300 cSt. max.PVC, PP, PVDF, stainless steel 1.4404/316L, brassPCpolyesterOrifice DN 6 to DN 65 (see fitting Type S030, pages 270 to 275)Flow transmitterOperating voltageCurrent consumptionOutputsCurrent signalPulseRelay (option)Battery IndicatorOperating voltageOutputPLC* o.F.S. = of Full Scale (10m/s)o.R. = of Reading12 to 30 V DC; 115/230 V AC - filtered and regulated≤ 70 mA with relays or < 20 mA without relay4-20 mA,max. load: 900 Ω at 30 V DC, 500 Ω at 24 V DC,100 Ω at 15 V DC, 800 Ω at 230 V ACTransistor open collector, NPN/PNP, 0... 30 V DC,100 mA, protected2 relays, 3A, 230 VAC, freely programmable2 x 9 V DC batteriesNone1) under reference conditions, i.e. fluid = water, temperatures = 20°C,up and downstream distances respected, adapted dimensions and pipesSubject to modifications