Fluid Control Systems Selected product range

312Pressure Transmitterfor general applications, 0 up to 25 barSensors 8323Type 8323 can be combined with...Type 8624-2PI controllerType 2712/1067Continuous controlglobe valveThe Type 8323 compact pressure transmitter isdesigned to cover the majority of industrial applicationsin the field of industrial pressure measurement technology.High accuracy, compact design, robust constructionand flexibility make this instrument universal and suitablefor different measurement functions.For technical reasons piezoresistive sensor element isused for measuring ranges up to 16 bar (232psi) andthin film sensor element for the measuring range of 25bar (363psi).Wetted parts are made of stainless steel and completelywelded. Internal seal elements, which could restrictthe choice of measuring materials, are excluded.• Piezoresistive or thin film sensor element• Available with flush diaphragm standard oracc. to EHEDG• Housing and wetted parts in corrosionresistantstainless steel• Standard signal 4... 20 mA for connection toautomation-systemsType 2702/8630Continuous controlangle-sent valveTechnical dataSensor elementMeasuring ranges [Pressure reference= relative pressure (atmospheric)]Pipe diameterStandard versionFlush diaphragm versionPLCpiezo (≤16 bar) / thin film (25 bar)0 up to 0.1, 0.16, 0.25, 0.4, 0.6, 1.0, 1.6, 2.5, 4.0, 6.0,10.0, 16.0 or 25.0 bar; 100, 200, 300, 400psiAny pipe with sensor connection:NPT 1/2G1” B with O-ring (range up to 1.6 bar)G1/2” B with O-ring (range > 1.6 bar)G1” B for EHEDG (all ranges)[Weld-on socket with connection G1/2”B G1”B]Electrical connection 4 pin cable plug DIN EN 175301-803Accuracy ≤ 0.5% o. F.S. (2-point calibration) 1)HysteresisRepeatability1-year stabilityOperating voltage (Vs)Output signal (2-wire)Load in ΩAdjustability zero/span ±10%Response timeElectrical protectionProtection classMaterialWetted partsStandard versionFlush diaphragm versionInternal transmitting liquidFluid temperatureAmbient temperatureCompensated T° rangeTemperature coefficientin compensated T° rangeAverage Tc of zeroStandard versionFlush diaphragm versionAverage Tc of Span≤ 0.25% o. F.S. (Best fit calibration, BFSL) 1)≤ 0.1% o. F.S.≤ 0.05% o. F.S.≤ 0.2% o. F.S. (at reference condition)10 - 30 V DCStandard 4-20 mA signal, 2 wires≤ (Vs[V] - 10[V]) / 0.02 A≤ 1 msShort circuit proof & protected against reverse polarity,overvoltageIP65Stainless steel 1.4571 (and 1.4542 with 25 bar)Stainless steel 1.4571, FKM sealSynthetic oil (only for pressure range up to 16 bar or for flushdiaphragm units)FDA approved-30 to +100 °C; (-22 to +212 °F)-20 to +150 °C (-4 to 302 ° F) (for flush diaphragm EHEDG version)-20 to +80 °C (-4 to 176 °F)0 to +80 °C (32 to 176 °F)≤ 0.2% o. F.S. / 10K≤ -0.2%... +0.3% o. F.S./ 10K≤ 0.2% o. F.S. / 10K1)calibrated in vertical mounting position with pressure connection bottomSubject to modifications