Fluid Control Systems Selected product range

292INSERTION fittingfor flow measurement• 6 to 400 mm orifice• Fitting for Insertion sensors, transmitters,batch controllers in pure, aggressive orcontaminated liquidsSensors S020Type S020 can be combined with...Type 8020Flow sensorType 8024Flow indicatorThe fitting S020 can be used to connect anyInsertion device for a measurement in the pipe,i.e. sensors, indicators, transmitters and batchcontrollers for flow measurement.• Large range of process connectionsTechnical dataPipe diameterFitting port connectionsMetalPlasticMaterialsSealBodyType 8025Flow transmitterFluid temperatureMax. fluid pressureAmbient temperatureDN 15 to DN 400 1) (DN 6 and DN 8 on request)Internal thread, weld ends, Tri-Clamp®, flange, weldingtab (external thread on request)True-union, fusion spigot, screw-on, saddle(spigot on request)FKM and EPDMStainless steel (316L/1.4404), brass (CuZn39Pb2),PVC, PP, PVDF, PEMax. 150°C (302 °F)Temperature limits may depend on the sensor and fitting.Please refer to appropriate instruction manual ordatasheet for more details.10 bar (145psi) (plastic fitting) - 16 bar (232psi) (metal fitting)Pressure limits may depend on the sensor and fitting.Please refer to appropriate instruction manual ordatasheet for more details. (see pressure-temperature chart onnext page)Temperature limits may depend on the sensor and fitting.Please refer to appropriate instruction manual ordatasheet for more details. (see pressure-temperature chart onnext page)Type 8045/ 8041Electromagnetic flowtransmitter1)Combination between fitting and sensor is sometimes restricted to some DN (see diagram on next page)Subject to modifications