Fluid Control Systems Selected product range

392Manifold assembly with Type MP07 pneumatic modules (example)Optional6519 EExConnector module,leftPneumatic basic module,3 valvesPneumatic intermediate supply module:Flow channels of a right connector modulemay be drilled for additional pressure supplyorConnector module, right:Supply channels closed off, thereby severaloperational pressures possible in a single blockPneumatic basic module, 2 valvesConnector module, rightSupply ports3 (R)1 (P)5 (S)Valves with EEx approval can be mounted on pneumatic modules to create manifoldassemblies in the same way as the standard valves. The picture above shows standardvalves with tag connectors. By replacing the push-over coils, it is very easy to change froma non-EEx operation to EEx operation.Manifold assembly, either wall-mounted or standard mounting EN 50022 or 50023ApprovalsValve assembly on pneumatic modules of Type MP07 using the supplied M4 screws.(n = number of valves, max. 12)Subject to modifications