Fluid Control Systems Selected product range

147Example3235 – 15.0 – AB – W – VI – FO85 – TI42 – DO50 * NO09+NO17Specification key3235 – XX.X – XX – X – XX – XXXX – XXXX – XXXX * Variable codesOrifice [mm] (diaphragm)15.020.025.040.050.080.00100Seal materialAB EPDM in food qualityEA PTFEFF FKM (Viton)Production of bodyB MonoblockW WeldBody materialVH AISI 316LVI 1.4435 BN2/ASMEVariable codesSurface finish externalNO03 Ext. Mirror finished Ra=0.25 µmNO09 Ext. Electro polished Ra=3.2 µm standardNO15 Ext. Electro polished Ra=0.8 µmNO19 Ext. Mech. polished poliert Ra=1.6 µmSurface finish internalNO07 Int. Mirror finished Ra=0.25 µmNO14 Int. Satin finished Ra=0.5 µmNO17 Int. Electro polished Ra=0.4 µm standardNO20 Int. Electro polished Ra=0.25 µmSpecific angleAF71Actuator versionD050D058D08545° Outlet angleTop PPS, Handwheel PPSTop Stainless steel,Handwheel PPS for Tank BottomGrey Cast iron,white epoxid paintedProcess Valves 3235Tank flangeDN15 FO85 (Ø 85 mm)DN20 FO85 (Ø 85 mm)DN25 F120 (Ø 120 mm)DN40 F150 (Ø 150 mm)DN50 F180 (Ø 180 mm)DN80 F254 (Ø 254 mm)DN100 F300 (Ø 300 mm)PORT CONNECTION ASME BPEPort connectionOrifice DN [mm] Weld end Tri-Clamp ®15.0 SA92=12.7x1.65 TI42=clamp 25 – Dint=9.420.0 SA93=19.05x1.65 TI43=clamp 25 – Dint=15.7525.0 SODF=25.4x1.65 TI44=clamp 50.5 – Dint=22.240.0 SODH=38.1x1.65 TI46=clamp 50.5 – Dint=34.950.0 SODI=50.8x1.65 TI47=clamp 64 – Dint=47.665.0 SA64=63.5x1.6580.0 SA65=76.2x1.65100.0 SA66=101.6x2.11Orifice DNdiaphragm[mm]Cv-value water[GPM]8.0 1.16 14515.0 6.96 14520.0 12.76 14525.0 18.56 14540.0 33.64 14550.0 58 145 1)80.0 185.6 102100.0 272.6 102Max. operatingpressure(medium) for sealmaterialEPDM and PTFE/EPDM [psi]Example of available materials, diaphragms• EPDM• PTFE/EPDM• FKM• CSM• PSI• PTFE/FKM• NBR• Butyl1) Max. operating pressure 102 psi for bonnet and manual actuator in PPSSubject to modifications