Fluid Control Systems Selected product range

263Dimensions [mm]Mounted on S030 fitting9450Hsee Type S030 INLINE fittingfor H dimensions on page 272.Interconnection possibilities Control valve Solenoid valveOrdering chart for the Type SE32 switch electronic moduleVoltage /FrequencyPLCInput 4-20 mA(Ext. setpoint)InputsType 8032Compact flowswitchMounting with Quarter-turn technologyOutputs12 - 30 V DC – NPN transistor cable plug Type 2508 DIN EN 175301-803 436 474ElectricalconnectionPNP transistor cable plug Type 2508 DIN EN 175301-803 434 871NPN / PNP transistor 5-pin M12 connector 436 473NPN / PNP transistor 5-pin M12 connector (UR/CSA approved) 553 431Relay 5-pin M12 connector and cable plug Type 2508 DIN EN 175301-803 436 4754 - 20 mA 1) 4 - 20 mA 2) + Relay 8-pin M12 connector and cable plug Type 2508 DIN EN 175301-803 444 6991)External setpoint2)Process value DIN plug with cable gland included, 1/2 conduit on request4-20 mAoutput30RelayoutputNote regarding the ordering of a complete switch:A switch 8032 consists of the electronic module Type SE32 and the INLINE fitting Type S030 (see pages 268 to 273).Please order the relevant INLINE fitting and the electronics separately!FLOW SWITCH67.554.2Solenoid valveTransistoroutputItem no.Sensors 8032Attention!No liability will be accepted for design errors. Please contact our Bürkert engineers as early as possible in the planning phase.Ordering chart for accessories (DIN plud included with sensor part number, please order M12 plugs separately!)SpecificationsItem no.5-pin M12 female cable connector with plastic threaded locking ring 917 1165-pin M12 female connector moulded on cable (2 m, shielded) 438 6808-pin M12 female cable connector with plastic threaded locking ring 444 7998-pin M12 female connector moulded on cable (2 m, shielded) 444 800Female cable plug Type 2508 DIN EN 175301-803 (with cable gland) 438 811Female cable plug Type 2509 DIN EN 175301-803 with reduction NPT1/2” (without cable gland) 162 673Subject to modifications