Fluid Control Systems Selected product range

3963/2-way I.S. Solenoid Valvefor pneumatic applications6014 I.S.Type 6014 EEx i can be combined with...• Direct-acting• Intrinsically-safe operation• Compact design• Push-over coil system• Threaded port and sub-base portin brass or stainless steel• ATEX approvedBarriersRemote I/OCylinderThe direct-acting, intrinsically safe Type 6014 I.S. valveconsists of a metal body and a push-over coil with tagconnectors on the side. The Type 6014 I.S. i can beused in a wide variety of ways, as a single valve, as apilot valve or grouped together in blocks. The valve isalso suitable for technical vacuum.Technical dataOrificeDN 0.9 mmPort connectionSub-base/Threaded portBody materialStainless steel or brassMetal parts Stainless steel 1.4305Seal materialFKMMediaLubricated and unlubricated compressed air,instrument air, nitrogenAmbient temperature -35 °C to +60 °C (-31 to 140 °F) (T6)-35 °C to +75 °C (-31 to 167 °F) (T5)Electrical connection Tag connectors acc. to DIN EN 175301-803 (previouslyDIN 43650), Form A for connector Type 2508(see Accessories). Ensure correct polarity!Protection classIP 65 with connectorEnvironmental conditions Open air, chemical atmosphereApprovalsNote:These units may only be used in explosive atmospheres inthe manner approved by the Federal Institute of Physicsand Technology (PTB), i.e., the permissible maximum electricalvalues must be complied with. Suitable barriers andisolating modules are available for this.PLCBarrier/isolatingcomponentElectrical dataType of protection II 2G EEx ia IIC T5,T6 PTB01 ATEX2101, FM CL1, Dir. 1, ABCDNote:The valve is intended for operation on 24 VDC outputs via certified intrinsically safecircuits (isolating module or barrier). If required, request the “Recommended Barrier andIsolating Module” data sheet.Functional values for the switching function of the valveat +20 °C (68 °F)at +55 °C (131 °F)Minimum switching current 29 mA 29 mANominal resistance of coil 310 Ω 360 ΩMinimum terminal voltage 9.0 V 10.44 VPermissible maximum values acc. certificate of conformityUi35 VIi0.9 APi1.1 WT-amb. max.+60 °C (140 °F) with T6+75 °C (167 °F) with T5Subject to modifications