Fluid Control Systems Selected product range

145Example3234 – 15.0 – AB – B – VH – SA92 – TI42 – DO50 * NO14+NO19Specification key3234 – XX.X – XX – X – XX – XXXX – XXXX – XXXX * Variable codesORIFICE [mm] (diaphragm)08.0 (only with DO58)15.020.025.040.050.0SEAL MATERIALAB EPDM in food qualityEA PTFEFF FKM (Viton)PRODUCTION OF BODYB MonoblockBODY MATERIALVF 1.4435VH AISI 316LVI 1.4435 BN2/ASMEVARIABLE CODESSurface finish ExternalNO03NO04NO15Ext. Mirror finished Ra=0.25µmExt. Super mirror finished RA=0.1µmExt. Electro polished Ra=0.8µmNO19 Ext. Mech. polished Ra=1.6µm standardSurface finish InternalNO07NO08NO10Int. Mirror finished Ra=0.25µmInt. Super mirror finished Ra=0.1µmInt. Electro polished Ra=0.8µmNO14 Int. Mech. polished Ra=0.5µm standardNO17NO20HandwheelHA24Int. Electro finished Ra=0.4µmInt. Electro polished Ra=0.25µmwith locking functionACTUATOR VERSIOND050D058Top PPSHandwheel PPSTop Stainless Steel,Handwheel PPS for T-Valvenot pos. withOrifice DN08Process Valves 3234PORT CONNECTION WELD ENDPORT CONNECTION TRI-CLAMP ®Orifice DN [mm] ASME BPE8.0 SA90=6.35x0.8910.0 SA91=9.53x0.8915.0 SA92=12.7x1.6520.0 SA93=19.05x1.6525.0 SODF=25.4x1.6540.0 SODH=38.1x1.6550.0 SODI=50.8x1.6565.0 SA64=63.5x1.65Flange 1(Main Tube) connectionFlange 2OrificeDN [mm]ASME BPE8.0 TI40=clamp 25 – Dint=3.9510.0 TI41=clamp 25 – Dint=7.1315.0 TI42=clamp 25 – Dint=9.420.0 TI43=clamp 25 – Dint=15.7525.0 TI44=clamp 50.5 – Dint=22.240.0 TI46=clamp 50.5 – Dint=34.950.0 TI47=clamp 64 – Dint=47.680.0 SA65=76.2x1.65For dimensions please see the datasheet100.0 SA66=101.6x2.11Orifice DNdiaphragm[mm]Cv-value water[GPM]8.0 1.16 14510.0 1.16 14515.0 6.96 14520.0 12.76 14525.0 18.56 14540.0 33.64 14550.0 58 145 1)Max. operatingpressure(medium) for sealmaterialEPDM and PTFE/EPDM [psi]Example of available materials, diaphragms• EPDM• PTFE/EPDM• FKM• CSM• PSI• PTFE/FKM• NBR• Butyl1) Max. operating pressure 102 psi for bonnet and manual actuator in PPSOrifice DN 65, DN 80 and DN 100 available by requestSubject to modifications