Fluid Control Systems Selected product range

1943/2-way Solenoid Valvefor gases and liquids• 3/2-way solenoid valve with manual override• Seat valve with servo-piston, enlarged outlet• Circuit function NC or NO0340• For neutral gases and liquids• Pivoted armature pilot drive, media-separatedType 0340 can be combined with...Process PneumaticsType 2508Cable plugThe pilot-controlled 3/2-way solenoid valve Type 0340with smoothly operating servo-piston requires a differentialpressure of 7psi for complete opening andclosing. A diaphragm separates the operating mediumfrom the drive. It can be used in many ways, even fordry running.Pressure Power consumptionrange Inrush HoldType 1078Timer unitAC DC AC DC[bar] [VA] [W] [VA/W] [W]0.5 – 16 30 8 15/8 80.5 – 10 30 8 15/8 8■ Port R is one orifice size larger than the ports A/B andP (see Dimensional Table). As a result, the flow A➔Ris increased by the factor 1.5 to 2 over the value inthe table.Type 2511Type 8600ASI cable plugDosing controlTechnical dataOrificeDN 8.0 - 40 mmBody materialBrassSeal materialNBRMediaNeutral mediaCompressed air, water, hydraulic oilMedia temperature0 to +90 °C (32 to 194 °F)Ambient temperature Max. +55 °C (131 °F)Viscosity Max. 21 mm 2 /sVoltage tolerance ±10%Duty cycle100% continuous ratingElectrical connection Cable plug for Ø 7 mm cable, acc. toDIN EN 175301-803 Form A (supplied as standard)Protection classIP 65 with cable plugInstallationAs required, preferably with actuator uprightSubject to modifications