Fluid Control Systems Selected product range

289Dimensions [mm]115 mmMounted on S020 fittingH199 mm162 mm88 mm8041see Type S020 Insertion fittingfor H dimensions on page 294.M20 x 1.588 mmInterconnection possibilitiesSolenoid valveControl valveType 8025 T / Bflow transmitter orbatch controllerwall-mounted orpanel-mounted version(see pages 284-285 and 288-289)Relayoutput4-20 mAoutputFrequencyoutputType 8041Electromagneticflow transmitterType S020Insertion fitting(see pages 292 to 299)SensorsOrdering chart for the Type 8041 electromagnetic transmitterVoltage supplyOutputsRelaysSensor versionElectricalconnectionItem no.18-36 V DC 4-20 mA, frequency 1 short 2 cable glands 552 779* To select the sensor length, please consult the Note on fitting dimensions Type S020 (pages 295 to 297).long 2 cable glands 552 780Note regarding the ordering of a complete transmitter:A complete transmitter 8041 consists of the Insertion fitting Type S020 (see pages 292 to 299) and the transmitter Type 8041.1 set (1 stopper for not used cable gland M 20 x 1.5 + 1 multiway seal 2 x 6 mm for cable gland + 1 black EPDM seal for the sensor + 1 mounting instruction sheet) and 1 relay connectionkit (1 screw terminal + 1 protection cap + 1 rilsan + 1 mounting instruction sheet) are supplied with each transmitter.Please order the relevant Insertion fitting and the transmitter separately!Attention!No liability will be accepted for design errors. Please contact our Bürkert engineers as early as possible in the planning phase.Subject to modifications